Generators are a great backup for when the power goes out, but they can also be used to provide power during a power outage. If you have a generator, it’s important to know how to properly repair it in case it stops working.
The first step is to make sure the generator is off and unplugged. Next, you’ll need to remove the spark plug wires. There are typically two spark plugs on a generator, so you’ll need to remove the wires from both of them. After that, you’ll need to remove the spark plugs.
The next step is to check the air filter. If the air filter is dirty, you’ll need to clean it. You can do this by using a vacuum cleaner or by wiping it with a damp cloth.
The next step is to check the oil level. The oil level should be between the minimum and maximum marks on the dipstick. If the oil level is low, you’ll need to add oil.
After that, you’ll need to check the fuel level. The fuel level should be between the minimum and maximum marks on the fuel tank. If the fuel level is low, you’ll need to add fuel.
After that, you’ll need to check the battery. The battery should be at 12 volts. If it’s not, you’ll need to charge it.
The last step is to start the generator. To do this, you’ll need to hold down the start button for a few seconds. Once the generator starts, release the button.